News Details
Water-borne wood flame retardant
2017-10-23 13:26:27
Water-borne wood flame retardant
Waterborne wood flame retardant mjb-f is a multi-functional wood protection agent with fireproof and anti-corrosion and stable dimensions. For wood has a strong flame retardant anticorrosion, dimension stability, strong effect of insect-resistant eat by moth, its main composition does not contain arsenic, chromium, copper, and persistent organic pollutants, low processing cost, make good solution can be recycled, conform to the requirements of the state environmental protection, comply with the eu RoHS directive under the restrictions on the use of PBB and PBDE testing requirements, the processed wood does not change the original color.
The water-borne wood flame retardant is converted to the combustion of ammonium nitrous compounds by the combination of tannin and phenolic compounds in wood. In turn, it can effectively change the combustion performance of wood.
Water load type wood fire retardant is mainly suitable for all kinds of plank (plywood) joinery semi-finished products, finished products, wood floor, wood furniture semi-finished products, finished products, wooden handicrafts, wooden line, wooden wall such as flame retardant protective treatment.
Water load type wood flame retardant product technical parameters 1. Appearance: transparent liquid 2, stability: stable coefficient 3, solubility: soluble in water. 4, ionic: nonionic 5, permeability: < 30 seconds (cottonwood veneer pretreatment) 6, effective activity content: 80%, viscosity (25 ℃) : 12 ~ 15 mpa. 9 s, specific gravity 1.4 1.45
Water load type flame retardant wood has a wide scope of protection, instant super penetration, good erosion resistance, into the wood after curing instantly generate insoluble ammonium nitrogen compounds, less volatile, not easily affected by rain or the soil moisture and erosion, strong weatherability, paint does not affect the construction, does not reduce the strength of wood and insulation, improve the dimension stability and corrosion protection, etc.
Clean up the first attachments on the surface of the wood before operation, and then select the mixed with water dilution in proportion. The configuration into aqueous solution, vacuum pressure, soaking and coating spraying method:
1, vacuum pressure processing: it is recommended to use concentration was 10% - 15%, with vacuum method processing agent to fully seepage calculation, general drug loadings 30 ~ 50 KG/m3 can meet the national building materials and wood combustion performance (GB 8624-2006), the provisions of the B2, B1 level 2, soaking method processing: it is recommended to use concentration of 15-20% on the basis of the water completely cover wood soaking time 15 to 30 minutes, spray coating processing: it is recommended to use concentration was 20% - 25% to fully absorb the wood surface (fully wetting for standard) coating spraying 20 to 25 square/KG, advice and spray coating with 2 advisable.
Trixylyl Phosphate(TXP)
Chinese Name: Tris (Xylene) Phosphate, Flame Retardant TXP
English Name: Trixylyl Phosphate
Appearance: Colorless Or Light Yellow Viscous Liquid, Slightly Soluble In Water, Soluble In General Organic Solvents.
Molecular Formula: C24H27 O4 P
Molecular Weight: 410.48
Acid Value: ≤0.1
Flash Point: ≥230
Moisture%: ≤0.1%
Melting Point: 46 Deg C
Specific Gravity: 1.130 ~ 1.150
Density: 1.154g / Cm3
Flash Point: 263.8 ° C
Refractive Index: 1.550? 1.560
Color Value: (PT-CO) ≤200
Refractive Index: N20 / D 1.552
Boiling Point: 490.8 ° Cat760mmHg
Raw Materials: Xylenol, Phosphorus Trichloride, Chlorine Through Esterification, Chlorination, Hydrolysis, Distillation Steps To Get.
Packing: Net Weight 200KG / Galvanized Iron Drum (A Small Cabinet Playing With 16 Tons), 1000KG / IB Bucket (A Small Cabinet 18 Tons) Or 23 Tons ISOTANK.
Trixylyl Phosphate(TXP) Use
Phosphate Trisphenylene Phosphate Is Low, Resistant To Hydrolysis, Good Flame Retardant Can Be Used As Vinyl Resin, Cellulose Resin, Natural And Synthetic Rubber Plasticizer, Low Volatility, Good Water Resistance, Flame Retardant. Trichenylene Phosphate Use For Use In Combustible Turbine Oils, With Good Flame Resistance And Good Thermal Oxidation Safety, Good Lubricity, Extreme Pressure Antiwear Additives For Lubricants, Thickeners. Also Used For Fire-Resistant Turbine Oil, With Good Thermal Oxidation Stability, Lubricity, As A Lubricant Anti-Wear Additives, Plasticizers, But Also For Flame Retardant, Wear-Resistant, Resistant To The Mold Of The Cable, Ethylene Conveyor Belt, Artificial Leather, Foam, Flooring Materials, But Also In Metallurgy, Electricity, Mechanical Engineering And Other Aspects As A Fire-Resistant Hydraulic Oil.
Operation must clean up dust and dirt on the surface of the wood, so as not to affect the permeability of liquid and reuse 2, homework when he comes into contact with the skin, should be timely and rinse off with clear water 3, should not be treated wood for food packing, operations, and stored in 4 should be far away from children. When the used reagents and don't throw away waste.
Cotton and hemp wood paper flame retardants can be used for cotton, flax, wool, etc., polyamide fiber, polyester, polyester, cotton-polyester, etc. In this product, soak for 5-10 minutes, remove extruded dehydration, natural drying or drying to make flame retardant fabric.
Cotton and hemp wood paper flame retardant can be used in artificial board, sheet flame retardant treatment: spray brush, drying or drying the plywood and various finishing wood products to achieve the desired flame retardant effect. Particle board, sheet saw foam board and so on in the process of production, will this product evenly mixed with other raw materials in proportion mixing any compression, after drying can have flame retardant effect. (squeeze out liquid still reusable).
Cotton and hemp wood paper flame retardant can be used in paper products. Packaging box. The flame retardant treatment of wallpaper. All kinds of paper. Paper packing. The wallpaper should be sprayed with the product 1-2 times to flame retardant. The stable heating range of the performance is wide, the user can decide according to the length of drying time, the drying temperature is 60-100 degrees centigrade.
It is widely used in the production of various kinds of plastic and fiber products. At present, the anti-oxidant flame retardants used in China are mostly halogen compounds, and many are additive ones. On the one hand, the application results are not good, and on the other hand, environmental pollution is also easily caused. Developed by the university of aromatic ring phosphate, it is not only good for oxygen and flame retardant properties, but also the combustion generated gas is not toxic.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
Waterborne wood flame retardant mjb-f is a multi-functional wood protection agent with fireproof and anti-corrosion and stable dimensions. For wood has a strong flame retardant anticorrosion, dimension stability, strong effect of insect-resistant eat by moth, its main composition does not contain arsenic, chromium, copper, and persistent organic pollutants, low processing cost, make good solution can be recycled, conform to the requirements of the state environmental protection, comply with the eu RoHS directive under the restrictions on the use of PBB and PBDE testing requirements, the processed wood does not change the original color.
The water-borne wood flame retardant is converted to the combustion of ammonium nitrous compounds by the combination of tannin and phenolic compounds in wood. In turn, it can effectively change the combustion performance of wood.
Water load type wood fire retardant is mainly suitable for all kinds of plank (plywood) joinery semi-finished products, finished products, wood floor, wood furniture semi-finished products, finished products, wooden handicrafts, wooden line, wooden wall such as flame retardant protective treatment.
Water load type wood flame retardant product technical parameters 1. Appearance: transparent liquid 2, stability: stable coefficient 3, solubility: soluble in water. 4, ionic: nonionic 5, permeability: < 30 seconds (cottonwood veneer pretreatment) 6, effective activity content: 80%, viscosity (25 ℃) : 12 ~ 15 mpa. 9 s, specific gravity 1.4 1.45
Water load type flame retardant wood has a wide scope of protection, instant super penetration, good erosion resistance, into the wood after curing instantly generate insoluble ammonium nitrogen compounds, less volatile, not easily affected by rain or the soil moisture and erosion, strong weatherability, paint does not affect the construction, does not reduce the strength of wood and insulation, improve the dimension stability and corrosion protection, etc.
Clean up the first attachments on the surface of the wood before operation, and then select the mixed with water dilution in proportion. The configuration into aqueous solution, vacuum pressure, soaking and coating spraying method:
1, vacuum pressure processing: it is recommended to use concentration was 10% - 15%, with vacuum method processing agent to fully seepage calculation, general drug loadings 30 ~ 50 KG/m3 can meet the national building materials and wood combustion performance (GB 8624-2006), the provisions of the B2, B1 level 2, soaking method processing: it is recommended to use concentration of 15-20% on the basis of the water completely cover wood soaking time 15 to 30 minutes, spray coating processing: it is recommended to use concentration was 20% - 25% to fully absorb the wood surface (fully wetting for standard) coating spraying 20 to 25 square/KG, advice and spray coating with 2 advisable.
Trixylyl Phosphate(TXP)
Chinese Name: Tris (Xylene) Phosphate, Flame Retardant TXP
English Name: Trixylyl Phosphate
Appearance: Colorless Or Light Yellow Viscous Liquid, Slightly Soluble In Water, Soluble In General Organic Solvents.
Molecular Formula: C24H27 O4 P
Molecular Weight: 410.48
Acid Value: ≤0.1
Flash Point: ≥230
Moisture%: ≤0.1%
Melting Point: 46 Deg C
Specific Gravity: 1.130 ~ 1.150
Density: 1.154g / Cm3
Flash Point: 263.8 ° C
Refractive Index: 1.550? 1.560
Color Value: (PT-CO) ≤200
Refractive Index: N20 / D 1.552
Boiling Point: 490.8 ° Cat760mmHg
Raw Materials: Xylenol, Phosphorus Trichloride, Chlorine Through Esterification, Chlorination, Hydrolysis, Distillation Steps To Get.
Packing: Net Weight 200KG / Galvanized Iron Drum (A Small Cabinet Playing With 16 Tons), 1000KG / IB Bucket (A Small Cabinet 18 Tons) Or 23 Tons ISOTANK.
Trixylyl Phosphate(TXP) Use
Phosphate Trisphenylene Phosphate Is Low, Resistant To Hydrolysis, Good Flame Retardant Can Be Used As Vinyl Resin, Cellulose Resin, Natural And Synthetic Rubber Plasticizer, Low Volatility, Good Water Resistance, Flame Retardant. Trichenylene Phosphate Use For Use In Combustible Turbine Oils, With Good Flame Resistance And Good Thermal Oxidation Safety, Good Lubricity, Extreme Pressure Antiwear Additives For Lubricants, Thickeners. Also Used For Fire-Resistant Turbine Oil, With Good Thermal Oxidation Stability, Lubricity, As A Lubricant Anti-Wear Additives, Plasticizers, But Also For Flame Retardant, Wear-Resistant, Resistant To The Mold Of The Cable, Ethylene Conveyor Belt, Artificial Leather, Foam, Flooring Materials, But Also In Metallurgy, Electricity, Mechanical Engineering And Other Aspects As A Fire-Resistant Hydraulic Oil.
Operation must clean up dust and dirt on the surface of the wood, so as not to affect the permeability of liquid and reuse 2, homework when he comes into contact with the skin, should be timely and rinse off with clear water 3, should not be treated wood for food packing, operations, and stored in 4 should be far away from children. When the used reagents and don't throw away waste.
Cotton and hemp wood paper flame retardants can be used for cotton, flax, wool, etc., polyamide fiber, polyester, polyester, cotton-polyester, etc. In this product, soak for 5-10 minutes, remove extruded dehydration, natural drying or drying to make flame retardant fabric.
Cotton and hemp wood paper flame retardant can be used in artificial board, sheet flame retardant treatment: spray brush, drying or drying the plywood and various finishing wood products to achieve the desired flame retardant effect. Particle board, sheet saw foam board and so on in the process of production, will this product evenly mixed with other raw materials in proportion mixing any compression, after drying can have flame retardant effect. (squeeze out liquid still reusable).
Cotton and hemp wood paper flame retardant can be used in paper products. Packaging box. The flame retardant treatment of wallpaper. All kinds of paper. Paper packing. The wallpaper should be sprayed with the product 1-2 times to flame retardant. The stable heating range of the performance is wide, the user can decide according to the length of drying time, the drying temperature is 60-100 degrees centigrade.
It is widely used in the production of various kinds of plastic and fiber products. At present, the anti-oxidant flame retardants used in China are mostly halogen compounds, and many are additive ones. On the one hand, the application results are not good, and on the other hand, environmental pollution is also easily caused. Developed by the university of aromatic ring phosphate, it is not only good for oxygen and flame retardant properties, but also the combustion generated gas is not toxic.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian