News Details
Water-based coating sealing crosslinking agent
2017-4-18 16:58:15
Water-based coating sealing crosslinking agent, also known as concrete sealing crosslinking agent and permeable water-tight seal curing agent, is a kind of colorless, transparent, convenient construction, non-toxic, non-combustible, strong penetration, sustainability sealed concrete liquid fertilizer, internal crosslinking agent by penetrating into the concrete, and its chemicals in chemical reaction, forming gel, shrinkage of concrete pore and fracture, make concrete a compact as a whole, thus greatly improving the surface hardness of concrete, the permeability, abrasion resistance, freeze-thaw cycle, etc. Various performance.
Water-based coating sealing crosslinking agent product advantage:
1, can effectively improve the hardness and strength of the concrete surface, density, compressive strength, resistance to wear;
2, tightening concrete wool stoma, can effectively curb outside pollutants into the concrete;
3, completely solve the problem of concrete up the dust of the ground, improves the concrete ground water resistance and chemical corrosion resistance;
4, after grinding processing surface will appear the burnish like marble, the longer use bright and clean degree, the better, looks more bright and beautiful.
Water-based coating sealing crosslinking agent suitable for:
Water-based coating sealing crosslinking agent using a wide range, suitable for all kinds of have the ground of the wear resistance and impermeability requirements area, mechanical workshop, printing workshop, underground garage, cement floor, new construction calender of virgin pulp concrete ground, emery wear-resisting floor, terrazzo floor etc.
Water-based coating sealing crosslinking agent construction mode: manual operation, the machine operation. Two layer construction method: manual workers wear rubber gloves, wear clean rain boots. According to the actual circumstance of the ground construction layer of crosslinking agent and A layer of crosslinking agent B.
The first layer construction: new ground can use clear water or detergent wash (open pores blocked by dirt or stolen goods), clear water and dry, dry spray after crosslinking agent such as A uniform on the work surface with A mop, about 2 hours with A keep surface moist crosslinking agent and uniform (don't make the potion together in low-lying place, in order to avoid surface hardness inconsistent), keep the surface wet with water after about 30 minutes to 1 hour to remove potions, clear water and dry, such as dry (6 to 8 hours).
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Second construction: spraying crosslinking agent on the ground and B mop uniform, about 2 hours with B to keep the surface moist crosslinking agent and uniform (don't make the potion together in low-lying place, in order to avoid surface hardness inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after water wash agent (be sure to clean, so as to avoid the ground white). Ground in 1-3 days after processing to achieve surface hardness, 90 days to reach the highest hardness, reducing the ground up.
Machine operation: two layer construction way: (according to the actual circumstance of the ground construction again sealing crosslinking agent A and again sealing crosslinking agent B)
New ground construction: the first layer can be removed using professional floor cleaning machine has cement carbide surface (open pores blocked by dirt or stolen goods) or from more than 300 # grinding, old ground can choose 50 #, 100 #, 300 #, 500 #, adjustment (refurbished), ground water blot, such as dry spray seal after crosslinking agent on the work surface with A mop, about 2 hours (depending on the penetration depth and stratum compactness) use agents keep surface wetting and even (don't make the potion together in low-lying place, and make the surface hardness of inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after removing reagent, water blot, such as dry (after six to eight hours).
The second construction: spray seal crosslinking agent B at the work face and mop, about 2 hours (depending on the penetration depth and stratum compactness) use agents keep surface wetting and even (don't make the potion together in low-lying place, and make the surface hardness of inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after adding water to remove agents (be sure to clean, so as to avoid surface pale), 8 - after 24 hours, using water 800 #, 1000 #, 2000 #, 3000 #, grinding processing, water blot, such as dry processing after the ground marble luster.
Ground in 1-3 days after processing to achieve surface hardness, 90 days to 120 days to achieve the highest hardness.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Water-based coating sealing crosslinking agent product advantage:
1, can effectively improve the hardness and strength of the concrete surface, density, compressive strength, resistance to wear;
2, tightening concrete wool stoma, can effectively curb outside pollutants into the concrete;
3, completely solve the problem of concrete up the dust of the ground, improves the concrete ground water resistance and chemical corrosion resistance;
4, after grinding processing surface will appear the burnish like marble, the longer use bright and clean degree, the better, looks more bright and beautiful.
Water-based coating sealing crosslinking agent suitable for:
Water-based coating sealing crosslinking agent using a wide range, suitable for all kinds of have the ground of the wear resistance and impermeability requirements area, mechanical workshop, printing workshop, underground garage, cement floor, new construction calender of virgin pulp concrete ground, emery wear-resisting floor, terrazzo floor etc.
Water-based coating sealing crosslinking agent construction mode: manual operation, the machine operation. Two layer construction method: manual workers wear rubber gloves, wear clean rain boots. According to the actual circumstance of the ground construction layer of crosslinking agent and A layer of crosslinking agent B.
The first layer construction: new ground can use clear water or detergent wash (open pores blocked by dirt or stolen goods), clear water and dry, dry spray after crosslinking agent such as A uniform on the work surface with A mop, about 2 hours with A keep surface moist crosslinking agent and uniform (don't make the potion together in low-lying place, in order to avoid surface hardness inconsistent), keep the surface wet with water after about 30 minutes to 1 hour to remove potions, clear water and dry, such as dry (6 to 8 hours).
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Second construction: spraying crosslinking agent on the ground and B mop uniform, about 2 hours with B to keep the surface moist crosslinking agent and uniform (don't make the potion together in low-lying place, in order to avoid surface hardness inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after water wash agent (be sure to clean, so as to avoid the ground white). Ground in 1-3 days after processing to achieve surface hardness, 90 days to reach the highest hardness, reducing the ground up.
Machine operation: two layer construction way: (according to the actual circumstance of the ground construction again sealing crosslinking agent A and again sealing crosslinking agent B)
New ground construction: the first layer can be removed using professional floor cleaning machine has cement carbide surface (open pores blocked by dirt or stolen goods) or from more than 300 # grinding, old ground can choose 50 #, 100 #, 300 #, 500 #, adjustment (refurbished), ground water blot, such as dry spray seal after crosslinking agent on the work surface with A mop, about 2 hours (depending on the penetration depth and stratum compactness) use agents keep surface wetting and even (don't make the potion together in low-lying place, and make the surface hardness of inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after removing reagent, water blot, such as dry (after six to eight hours).
The second construction: spray seal crosslinking agent B at the work face and mop, about 2 hours (depending on the penetration depth and stratum compactness) use agents keep surface wetting and even (don't make the potion together in low-lying place, and make the surface hardness of inconsistent), keep the surface wet with water, about 30 minutes to 1 hour after adding water to remove agents (be sure to clean, so as to avoid surface pale), 8 - after 24 hours, using water 800 #, 1000 #, 2000 #, 3000 #, grinding processing, water blot, such as dry processing after the ground marble luster.
Ground in 1-3 days after processing to achieve surface hardness, 90 days to 120 days to achieve the highest hardness.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian