News Details
Thermosetting acrylic resin paint crosslinking agent
2017-6-10 15:27:35
Thermosetting acrylic resin paint crosslinking agent
Thermosetting acrylic resin has been added to the right amount of crosslinking agent, solvent, eye ageing, toughening agent and other kinds of thermosetting acrylic resin paint. Mainly used in automobile, light industrial products.
Two-component room temperature dry coating with excellent adhesion, chemical resistance, alkali resistance, electrical insulation, good toughness, one of the wet surface anti-rust primer, floor paint, car paint, etc.
Single component baking paint. It has certain wet force, can make underwater construction coating. Outdoor resistance, low temperature crosslinking, can be warm and dry, can be baked at high temperature, can be combined with various crosslinking agents to make a variety of coatings.
The coating of synthetic resin as the main film. Its mechanical properties, decoration and protection are better than the oil coating and natural resin coating. Since the advent of phenolic resin coating in 1909, synthetic resin coating has developed rapidly.
There are many kinds of synthetic resin. There are carbon chains, hybrid chains and non-carbon chain synthetic resins in the main chain. It is characterized by the synthesis and condensation synthesis. In practical applications, thermoplastic resin and thermosetting resin are usually classified as thermal behavior. Early in the production of synthetic resin rich raw material sources, give priority to with coal tar products and calcium carbide acetylene, now more than with oil and gas products, such as ethylene, propylene, benzene, formaldehyde and urea, etc. The production methods of synthetic resin are polymerization, suspension polymerization, emulsion polymerization, solution polymerization, melting polymerization and interfacial condensation.
Coating of polyester resin as film material is called unsaturated polyester lacquer. This kind of lacquer is solvent-free paint, the impregnation is high, the drying is quick, the coating film is immersed in the water or the insulation resistance changes small after the damp. It is commonly used as a coating for insulating paint and high-grade living goods.
Performance and type of polyester resin
1. unsaturated polyester resin with high strength, light quality, good toughness, bright transparent, solvent resistance, moisture resistance, resistance to chemicals and insulation performance, can be used for electrical appliance industry, etc.
Saturated polyester resin: can be used as a paint and also can be used as a toughening agent for cellulose and vinyl.
Oil modified polyester resin: alkyd resin paint.
Polyester resin: impregnated insulating paint and enamelled paint in the coating industry.
Polyhydroxypolyester resin: not only for paint, but also for lacquer.
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Variety of polyester paint:
Unsaturated polyester paint: it has (1) no solvent; (2) the paint film can heat up the crosslink, and it can be interlinked. (3) after polished and polished, the paint film is bright, and the hardness is high. (4) having certain heat resistance and cold resistance; (5) weak acid, alkali and solvents. Unsaturated polyester paints can be used as wood, metal, brick, cement and electrical insulation coatings.
Polylipids: good moisture-proof and insulating properties, suitable for electrical insulation of wet and hot zone.
Thermoplastic acrylic resin paint
Thermoplastic acrylic resin paint for varnish, enamel and primer.
1. The varnish:
Acrylic varnish is used for solvents of ketones, lipids, benzene, and individual varieties soluble in alcohols. It is characterized by fast drying, good weather condition, good colour and lustre, and good water resistance. But the solvent is large in spray, and the resistance to heat and solvent is not good.
2. The enamel:
Acrylic resins are used in solvents, additives and pigments to make enamel.
3. The primer:
It is usually composed of methyl methacrylate and methacrylic acid, which are soluble in lipids, alcohols, and benzene solvents, as well as strontium, toughening agent and body pigment. The film has the advantages of adhesion, drying at room temperature, etc., which can be applied to metal equipment and magnesium alloy bottom surface.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Thermosetting acrylic resin has been added to the right amount of crosslinking agent, solvent, eye ageing, toughening agent and other kinds of thermosetting acrylic resin paint. Mainly used in automobile, light industrial products.
Two-component room temperature dry coating with excellent adhesion, chemical resistance, alkali resistance, electrical insulation, good toughness, one of the wet surface anti-rust primer, floor paint, car paint, etc.
Single component baking paint. It has certain wet force, can make underwater construction coating. Outdoor resistance, low temperature crosslinking, can be warm and dry, can be baked at high temperature, can be combined with various crosslinking agents to make a variety of coatings.
The coating of synthetic resin as the main film. Its mechanical properties, decoration and protection are better than the oil coating and natural resin coating. Since the advent of phenolic resin coating in 1909, synthetic resin coating has developed rapidly.
There are many kinds of synthetic resin. There are carbon chains, hybrid chains and non-carbon chain synthetic resins in the main chain. It is characterized by the synthesis and condensation synthesis. In practical applications, thermoplastic resin and thermosetting resin are usually classified as thermal behavior. Early in the production of synthetic resin rich raw material sources, give priority to with coal tar products and calcium carbide acetylene, now more than with oil and gas products, such as ethylene, propylene, benzene, formaldehyde and urea, etc. The production methods of synthetic resin are polymerization, suspension polymerization, emulsion polymerization, solution polymerization, melting polymerization and interfacial condensation.
Coating of polyester resin as film material is called unsaturated polyester lacquer. This kind of lacquer is solvent-free paint, the impregnation is high, the drying is quick, the coating film is immersed in the water or the insulation resistance changes small after the damp. It is commonly used as a coating for insulating paint and high-grade living goods.
Performance and type of polyester resin
1. unsaturated polyester resin with high strength, light quality, good toughness, bright transparent, solvent resistance, moisture resistance, resistance to chemicals and insulation performance, can be used for electrical appliance industry, etc.
Saturated polyester resin: can be used as a paint and also can be used as a toughening agent for cellulose and vinyl.
Oil modified polyester resin: alkyd resin paint.
Polyester resin: impregnated insulating paint and enamelled paint in the coating industry.
Polyhydroxypolyester resin: not only for paint, but also for lacquer.
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Variety of polyester paint:
Unsaturated polyester paint: it has (1) no solvent; (2) the paint film can heat up the crosslink, and it can be interlinked. (3) after polished and polished, the paint film is bright, and the hardness is high. (4) having certain heat resistance and cold resistance; (5) weak acid, alkali and solvents. Unsaturated polyester paints can be used as wood, metal, brick, cement and electrical insulation coatings.
Polylipids: good moisture-proof and insulating properties, suitable for electrical insulation of wet and hot zone.
Thermoplastic acrylic resin paint
Thermoplastic acrylic resin paint for varnish, enamel and primer.
1. The varnish:
Acrylic varnish is used for solvents of ketones, lipids, benzene, and individual varieties soluble in alcohols. It is characterized by fast drying, good weather condition, good colour and lustre, and good water resistance. But the solvent is large in spray, and the resistance to heat and solvent is not good.
2. The enamel:
Acrylic resins are used in solvents, additives and pigments to make enamel.
3. The primer:
It is usually composed of methyl methacrylate and methacrylic acid, which are soluble in lipids, alcohols, and benzene solvents, as well as strontium, toughening agent and body pigment. The film has the advantages of adhesion, drying at room temperature, etc., which can be applied to metal equipment and magnesium alloy bottom surface.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian