News Details
Solventless epoxy heavy conducting electrostatic anticorrosion coating with crosslinking agent
2017-3-28 11:23:27
Solventless epoxy heavy conducting electrostatic anticorrosion coating with crosslinking agent,This is a kind of can prevent the accumulation of static electricity, as well as a new type of heavy-duty anticorrosion coating. It has high hardness and wear resistance, excellent adhesion. Good impact resistance and resistance to cathodic stripping, thick coating, quick crosslinking; Excellent channel electrostatic performance. No solvent evaporation, no environmental hazards. The highest heat 120 ℃ dry heat.
Crude oil and various solvents, also very easy to generate static electricity in the process of storage and transportation and accumulation in oil shows that when encountered lightning strike is likely to lead to burst into flames. When the tanks for non-metallic materials or tank material is metal, but its anticorrosive material is insulation material, the accumulation of static electricity cannot be piped out in time, would be easy to burst into flames caused by a lightning stroke. Only by adopting advanced technology of the static electricity effectively guide, to avoid the accident.
This coating is made from jun jiang company BC - C series conductive powder, it can conduct electricity, can heavy-duty again. Technical requirements, therefore, strict and harsh, for crude oil storage tank and various kinds of flammable explosive quality, is a kind of ideal anticorrosion material.
It is widely used in oil tank wall anticorrosive oil system, various chemical storage tank, gas tank on corrosion protection of the company. Such as: marina 2 first discharge station within the tank wall and annex 4 outer wall using this coating, gray.
Water paint, primer, diatom mud, paint the walls, wood brush, brush metal, most people can use all kinds of paint when decorate.
Traditional coatings
First is the traditional coating, is that when I was a child as long as a brush in the home, the streets can smell the smell of the paint. It is organic solvent as medium, when brushing will produce the harmful gas such as formaldehyde, benzene, so will produce irritating smell. Now many places have policies, to switch to the coating of health of environmental protection, the traditional coating will gradually away from our life.
Water paint is a spotlight in recent years is a new type of coating, environmental health is an important characteristic of it. Water-based paint is water as diluent liquid coating. Water-based paint biggest difference with traditional coating, is water-based paint does not need to add any crosslinking agent, diluent, need water to mediate, so it does not contain harmful substances such as formaldehyde, benzene, xylene, and thus put an end to the cause of air pollution. Along with the people environmental protection consciousness, water-based painted decoration is new bestow favor on.
Wood coatings, it is to brush paint on wood, also divided into two kinds of aqueous and oily. The traditional wood coatings as we said before the traditional coating has the nature of the and volatile, so easy to turn yellow. Yes, that looks good, your family, over the years, yellowish white furniture is because the brush due to the traditional wood coatings. Waterborne wood paint are different, it besides environmental health, but also because of itself has no volatile, so you can keep white furniture bright white as new.
Diatom mud is a kind of diatomaceous earth as the main raw materials of interior environmental protection adornment wall, just like water paint, it also has clean air, moisture, release of negative oxygen ions, sterilization deodorant, and other functions. For environmental health, diatom mud is really a good choice. Diatom mud can complete complex texture of individuation production, which means it can make metope texture. But there was no way to achieve the effect of water paint then level off is smooth, and not to bear or endure dirty is not easy to scrub.
Chinese name: Diethyl toluene diamine(DETDA)
Diethyltoluenediamine Raw material ：
TDA industrial, Sichuan production
Ethylene (Et) polymer grade, Shanghai production
TEA industrial imports
A reagent grade additives
The paint grain of phenomenon the reason very poor (feel) :
A. the construction environment is poor, dust is too much;
B. nozzle is too small, too much pressure spray paint is bad;
C. spray room ventilation is not good, when construction in spray room space left a layer of mist;
D. use crosslinking agent has metamorphism;
E. paint and crosslinking agent after mixing time is too long, the paint has gel.
Prevention and control, and the solution:
(1) the redevelopment of the spray room clean air, clean room, control the irrelevant personnel to enter;
(2) adjust the size of the spray gun nozzle, paint spraying best nozzle diameter 1.5 mm or so, adjust the pressure;
(3) spray gun with the distance of the workpiece on the best distance;
(4) make the spray room well ventilated, construction when there will be no spray mist air stays in the room;
Use good quality crosslinking agent; Paint mixes with the crosslinking agent, should be finished within 4 hours.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Crude oil and various solvents, also very easy to generate static electricity in the process of storage and transportation and accumulation in oil shows that when encountered lightning strike is likely to lead to burst into flames. When the tanks for non-metallic materials or tank material is metal, but its anticorrosive material is insulation material, the accumulation of static electricity cannot be piped out in time, would be easy to burst into flames caused by a lightning stroke. Only by adopting advanced technology of the static electricity effectively guide, to avoid the accident.
This coating is made from jun jiang company BC - C series conductive powder, it can conduct electricity, can heavy-duty again. Technical requirements, therefore, strict and harsh, for crude oil storage tank and various kinds of flammable explosive quality, is a kind of ideal anticorrosion material.
It is widely used in oil tank wall anticorrosive oil system, various chemical storage tank, gas tank on corrosion protection of the company. Such as: marina 2 first discharge station within the tank wall and annex 4 outer wall using this coating, gray.
Water paint, primer, diatom mud, paint the walls, wood brush, brush metal, most people can use all kinds of paint when decorate.
Traditional coatings
First is the traditional coating, is that when I was a child as long as a brush in the home, the streets can smell the smell of the paint. It is organic solvent as medium, when brushing will produce the harmful gas such as formaldehyde, benzene, so will produce irritating smell. Now many places have policies, to switch to the coating of health of environmental protection, the traditional coating will gradually away from our life.
Water paint is a spotlight in recent years is a new type of coating, environmental health is an important characteristic of it. Water-based paint is water as diluent liquid coating. Water-based paint biggest difference with traditional coating, is water-based paint does not need to add any crosslinking agent, diluent, need water to mediate, so it does not contain harmful substances such as formaldehyde, benzene, xylene, and thus put an end to the cause of air pollution. Along with the people environmental protection consciousness, water-based painted decoration is new bestow favor on.
Wood coatings, it is to brush paint on wood, also divided into two kinds of aqueous and oily. The traditional wood coatings as we said before the traditional coating has the nature of the and volatile, so easy to turn yellow. Yes, that looks good, your family, over the years, yellowish white furniture is because the brush due to the traditional wood coatings. Waterborne wood paint are different, it besides environmental health, but also because of itself has no volatile, so you can keep white furniture bright white as new.
Diatom mud is a kind of diatomaceous earth as the main raw materials of interior environmental protection adornment wall, just like water paint, it also has clean air, moisture, release of negative oxygen ions, sterilization deodorant, and other functions. For environmental health, diatom mud is really a good choice. Diatom mud can complete complex texture of individuation production, which means it can make metope texture. But there was no way to achieve the effect of water paint then level off is smooth, and not to bear or endure dirty is not easy to scrub.
Chinese name: Diethyl toluene diamine(DETDA)
Diethyltoluenediamine Raw material ：
TDA industrial, Sichuan production
Ethylene (Et) polymer grade, Shanghai production
TEA industrial imports
A reagent grade additives
The paint grain of phenomenon the reason very poor (feel) :
A. the construction environment is poor, dust is too much;
B. nozzle is too small, too much pressure spray paint is bad;
C. spray room ventilation is not good, when construction in spray room space left a layer of mist;
D. use crosslinking agent has metamorphism;
E. paint and crosslinking agent after mixing time is too long, the paint has gel.
Prevention and control, and the solution:
(1) the redevelopment of the spray room clean air, clean room, control the irrelevant personnel to enter;
(2) adjust the size of the spray gun nozzle, paint spraying best nozzle diameter 1.5 mm or so, adjust the pressure;
(3) spray gun with the distance of the workpiece on the best distance;
(4) make the spray room well ventilated, construction when there will be no spray mist air stays in the room;
Use good quality crosslinking agent; Paint mixes with the crosslinking agent, should be finished within 4 hours.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Diethyl toluene diamine(DETDA) http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian