News Details
Main plasticizers of phthalic acid two formic acid esters
2017-12-17 17:32:13
Main plasticizers of phthalic acid two formic acid esters
O-phthalic acid esters main plasticizer is the most widely used main plasticizer at present. It has many varieties, high yield, and has the characteristics of light color, low toxicity, good electrical properties, small volatile parts, less odor and low temperature resistance. The main plasticizer is two kinds of main plasticizers.
At present, the consumption of the main plasticizer of o-phthalic acid esters is about 80-85% of the total consumption of plasticizers. The most commonly used ortho phenyl two formate plasticizers are two kinds of o-phenyl two formic acid, two octyl esters and two benzoic acid two isooctyl esters.
(1) two octyl (DOP) of phthalic acid and two formic acid. A colorless oily liquid with a special odor.
(2) two ISO octyl (DIOP) of phthalic acid and two formic acid. Almost colorless viscous liquid, soluble in most organic solvents and hydrocarbons, (3) phthalic acid two ISO Decyl (DIDP). Thick liquid, soluble in most organic solvents and hydrocarbons, insoluble in or slightly soluble in glycerol, glycol, and some amines. It is less volatile than DOP. Resistance to migration is a kind of low volatile plasticizer. It is resistant to aging and has good electrical properties, but its phase solubility is poor.
(4) two ISO nonyl ester (DINP) of phthalic acid two formic acid. The volatile oil like liquid is only half the volatility of DOP at high temperature.
(5) dibutyl phthalate (DBP). Colorless transparent liquid, with aromatic odor, soluble in most organic solvents and hydrocarbons. The critical plasticizing temperature of DBP to PVC is 90 - 95 C.
(6) two isobutyl phthalic acid (DIBP). A colorless transparent liquid, used by DIBP in the PVC agricultural film, has been found to cause rice rot rot due to its precipitation.
(7) benzyl butyl phthalate (BBP). Transparent oil - like liquid, dissolved in organic solvents and hydrocarbons, insoluble in water. The critical plasticizing temperature of BBP to PVC is 96-100 C.
(8) phthalic acid two methyl ester (DMP). Colorless oil like liquid, microstrip aromatic odor, insoluble in water at normal temperature, mixed with fatty hydrocarbons, and well soluble with most of the resins.
(9) two ethyl ortho - benzoate (DEP). Colorless oil like liquid, non-toxic, microstrip aromatic odor, soluble in most organic solvents.
(10) phthalic acid - hexyl hexyl hexyl ester (DCHP). A white crystalline powder with aromatic odor. Soluble in most organic solvents, it is completely dissolved in hot gasoline and mineral oil, and is slightly soluble in ethylene glycol and some amine.
(11) two octyl terephthalate (DOTP). The physical properties of DOTP and DOP are similar, and the mechanical properties of the products are similar, but the volatile parts of DOTP are much smaller than that of DOP.
Two octyl phthalate (Dioctyl Phthalate), or two octyl (DOP), is an organic ester and is a commonly used plasticizer.
Two octyl benzoic acid two octyl ester is an important general plasticizer. It is mainly used for the processing of PVC resin, and can also be used for the processing of chemical fiber, resin, ABS resin, rubber and other polymers. It can also be used for paints, dyes, dispersants and so on.
Two octyl terephthalate (plasticizer DOTP) information:
Shipping port: Shanghai port
Price quotation validity: 15 days
Entry time: 15 days (inspection declaration)
Export authority: the company's right to import and export
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
General level DOP: widely used in plastics, rubber, paint and emulsifiers and other industries. The plasticized PVC can be used in the manufacture of artificial leather, agricultural film, packaging material, cable and so on.
Electrical grade DOP: with all the performance of the general level DOP, it also has good electrical insulation performance, which is mainly used to produce wire and electricity.
Food grade DOP: mainly used in the production of food packaging materials.
Medical grade DOP: mainly used in the production of medical and health products, such as disposable medical equipment and medical packaging materials.
DOP is a common type of plasticizer, mainly used for the processing of PVC, fat can also be used for processing of acetic acid resin, resin, ABS resin and rubber polymer, can also be used for paint, dye and dispersant, DOP plasticized PVC can be used in the manufacture of artificial leather, agricultural film, packaging materials, cable.
The plasticizer, the most widely used plasticizer in industry, has good compatibility with cellulose acetate and polyvinyl acetate, and most of the synthetic resins and rubbers used in industry. This product has good comprehensive properties, good mixing performance, high plasticizing efficiency, low volatility, low temperature softness, water resistance, high electrical performance, good heat resistance and weather resistance.
In HVAC, it is used to test the filtration efficiency of the high efficiency filter. Because of the high efficiency filter, 0.3um (micron) is the maximum penetration rate, so DOP is used to test the efficiency of the filter.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
O-phthalic acid esters main plasticizer is the most widely used main plasticizer at present. It has many varieties, high yield, and has the characteristics of light color, low toxicity, good electrical properties, small volatile parts, less odor and low temperature resistance. The main plasticizer is two kinds of main plasticizers.
At present, the consumption of the main plasticizer of o-phthalic acid esters is about 80-85% of the total consumption of plasticizers. The most commonly used ortho phenyl two formate plasticizers are two kinds of o-phenyl two formic acid, two octyl esters and two benzoic acid two isooctyl esters.
(1) two octyl (DOP) of phthalic acid and two formic acid. A colorless oily liquid with a special odor.
(2) two ISO octyl (DIOP) of phthalic acid and two formic acid. Almost colorless viscous liquid, soluble in most organic solvents and hydrocarbons, (3) phthalic acid two ISO Decyl (DIDP). Thick liquid, soluble in most organic solvents and hydrocarbons, insoluble in or slightly soluble in glycerol, glycol, and some amines. It is less volatile than DOP. Resistance to migration is a kind of low volatile plasticizer. It is resistant to aging and has good electrical properties, but its phase solubility is poor.
(4) two ISO nonyl ester (DINP) of phthalic acid two formic acid. The volatile oil like liquid is only half the volatility of DOP at high temperature.
(5) dibutyl phthalate (DBP). Colorless transparent liquid, with aromatic odor, soluble in most organic solvents and hydrocarbons. The critical plasticizing temperature of DBP to PVC is 90 - 95 C.
(6) two isobutyl phthalic acid (DIBP). A colorless transparent liquid, used by DIBP in the PVC agricultural film, has been found to cause rice rot rot due to its precipitation.
(7) benzyl butyl phthalate (BBP). Transparent oil - like liquid, dissolved in organic solvents and hydrocarbons, insoluble in water. The critical plasticizing temperature of BBP to PVC is 96-100 C.
(8) phthalic acid two methyl ester (DMP). Colorless oil like liquid, microstrip aromatic odor, insoluble in water at normal temperature, mixed with fatty hydrocarbons, and well soluble with most of the resins.
(9) two ethyl ortho - benzoate (DEP). Colorless oil like liquid, non-toxic, microstrip aromatic odor, soluble in most organic solvents.
(10) phthalic acid - hexyl hexyl hexyl ester (DCHP). A white crystalline powder with aromatic odor. Soluble in most organic solvents, it is completely dissolved in hot gasoline and mineral oil, and is slightly soluble in ethylene glycol and some amine.
(11) two octyl terephthalate (DOTP). The physical properties of DOTP and DOP are similar, and the mechanical properties of the products are similar, but the volatile parts of DOTP are much smaller than that of DOP.
Two octyl phthalate (Dioctyl Phthalate), or two octyl (DOP), is an organic ester and is a commonly used plasticizer.
Two octyl benzoic acid two octyl ester is an important general plasticizer. It is mainly used for the processing of PVC resin, and can also be used for the processing of chemical fiber, resin, ABS resin, rubber and other polymers. It can also be used for paints, dyes, dispersants and so on.
Two octyl terephthalate (plasticizer DOTP) information:
Shipping port: Shanghai port
Price quotation validity: 15 days
Entry time: 15 days (inspection declaration)
Export authority: the company's right to import and export
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
General level DOP: widely used in plastics, rubber, paint and emulsifiers and other industries. The plasticized PVC can be used in the manufacture of artificial leather, agricultural film, packaging material, cable and so on.
Electrical grade DOP: with all the performance of the general level DOP, it also has good electrical insulation performance, which is mainly used to produce wire and electricity.
Food grade DOP: mainly used in the production of food packaging materials.
Medical grade DOP: mainly used in the production of medical and health products, such as disposable medical equipment and medical packaging materials.
DOP is a common type of plasticizer, mainly used for the processing of PVC, fat can also be used for processing of acetic acid resin, resin, ABS resin and rubber polymer, can also be used for paint, dye and dispersant, DOP plasticized PVC can be used in the manufacture of artificial leather, agricultural film, packaging materials, cable.
The plasticizer, the most widely used plasticizer in industry, has good compatibility with cellulose acetate and polyvinyl acetate, and most of the synthetic resins and rubbers used in industry. This product has good comprehensive properties, good mixing performance, high plasticizing efficiency, low volatility, low temperature softness, water resistance, high electrical performance, good heat resistance and weather resistance.
In HVAC, it is used to test the filtration efficiency of the high efficiency filter. Because of the high efficiency filter, 0.3um (micron) is the maximum penetration rate, so DOP is used to test the efficiency of the filter.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian