News Details
Liquid curing agent
2017-2-19 17:55:34
Liquid curing agent, its action principle is liquid curing agent react with concrete components by osmosis, chemical reactants generated the wool stoma of filled concrete, from the internal seal, convert it into a solid sealed whole, so as to achieve: wear resistant, sealed seepage control, dust, clean, lasting sheen, maintenance is simple, safe environmental protection, due to the use of forklift friction, not only won't make the ground roughness, but is used more and more beautiful, silky luster.
Liquid curing agent to solve the problem
(1), concrete ground (concrete, terrazzo, carborundum) of ash, dust and powder;
(2), concrete ground (concrete, terrazzo, carborundum) intensity, hardness is not enough, not enough pressure, abrasion resistance, impact resistance; (3), concrete ground (concrete, terrazzo, carborundum) enough beautiful, water seepage and seepage oil, not easy to clean;
(4), infiltration of water, oil and chemical erosion, ground sliding;
(5), concrete ground maintenance trouble, cost is high.
Large area of ground for old paint surface, oil pollution is serious, penetrate deeper, treatment scheme: the surface grinding with diamond grinding machine, grinding out concrete 1 centimeter or so, clean; The next step in 50 mesh, 100 mesh, 150 mesh, 300 mesh, 500 mesh, 800 mesh, 800 mesh, 2000 mesh, 3000 mesh fine grinding.
Completely solve the EPOXY floor paint (EPOXY) scratches, fading, peeling, blister, etc;
High abrasion resistance, compression and impact resistance.
Permeability: permanently sealed concrete, effectively restrain water, oil and so on into the concrete;
Dust: fill the gap inside the concrete, to avoid the dust from the precipitation, surface permanent does not produce dust;
Chemical resistance: after processing the concrete resistance to certain ph value, improve its chemical resistance;
Maintenance: the processed concrete fully, uniformity of maintenance, greatly improved the life;
Environmental protection: colorless, non-toxic, odourless, non-combustible;
Marble and bright luster: processed concrete, and the more luster, the better;
Skid: processed concrete even with water can be used normally;
Free maintenance: the processed effect of concrete and concrete life, also a treatment effect for at least 20 years;
Low cost, convenient use, top grade and beautiful.
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Floor construction should have the condition
1), a new pouring concrete surface shall be maintained for a period of time fully dry rear can construction,
2), because of liquid curing agent on the surface isn't film, its flatness, bright and clean degree to a great extent, dependent on the ground. So the new pouring concrete surface protection is very important,
3), when you receive light to avoid mark, slag cement and shoes printing, color, etc. To avoid the paint, oil, smashing, scratches and other surface, damage,
4), construction temperature: not less than zero, no more than 50 degrees
Hardening floor construction basic requirements
1), remove the floating cement and sundry: use the installation disk mechanical float (edge of the template appropriate USES wood trowel) evenly to remove concrete surface laitance layer
2), the smoothness. Flatness is whether the basic of basic level surface is in horizontal position, whether there is irregular uneven. Flatness simple judgment method is post rod of length 2 meters on the ground at the grass-roots level, of gap on the basis of not more than 2 mm.
3), the base surface smoothness. Smoothness is whether in the construction of cement mortar surface with a metal float daub is very smooth, not rough, rough. If the base surface state particularly coarse, a waste of labor and materials. Smoothness is generally judged by visual inspection.
Base treatment purposes
1), remove dust, loose old paint film on the surface of the concrete, oil, etc., can make the material more effectively penetrate into concrete inside;
2), the structure of cutting seam, seams, cracks, empty drum part do the corresponding processing, to ensure the overall unity of ground effect.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Liquid curing agent to solve the problem
(1), concrete ground (concrete, terrazzo, carborundum) of ash, dust and powder;
(2), concrete ground (concrete, terrazzo, carborundum) intensity, hardness is not enough, not enough pressure, abrasion resistance, impact resistance; (3), concrete ground (concrete, terrazzo, carborundum) enough beautiful, water seepage and seepage oil, not easy to clean;
(4), infiltration of water, oil and chemical erosion, ground sliding;
(5), concrete ground maintenance trouble, cost is high.
Large area of ground for old paint surface, oil pollution is serious, penetrate deeper, treatment scheme: the surface grinding with diamond grinding machine, grinding out concrete 1 centimeter or so, clean; The next step in 50 mesh, 100 mesh, 150 mesh, 300 mesh, 500 mesh, 800 mesh, 800 mesh, 2000 mesh, 3000 mesh fine grinding.
Completely solve the EPOXY floor paint (EPOXY) scratches, fading, peeling, blister, etc;
High abrasion resistance, compression and impact resistance.
Permeability: permanently sealed concrete, effectively restrain water, oil and so on into the concrete;
Dust: fill the gap inside the concrete, to avoid the dust from the precipitation, surface permanent does not produce dust;
Chemical resistance: after processing the concrete resistance to certain ph value, improve its chemical resistance;
Maintenance: the processed concrete fully, uniformity of maintenance, greatly improved the life;
Environmental protection: colorless, non-toxic, odourless, non-combustible;
Marble and bright luster: processed concrete, and the more luster, the better;
Skid: processed concrete even with water can be used normally;
Free maintenance: the processed effect of concrete and concrete life, also a treatment effect for at least 20 years;
Low cost, convenient use, top grade and beautiful.
Chinese name: Diethyl toluene diamine(DETDA)
Chinese alias: aryl, aryl diethyl - aryl - methyl-p-phenylenediamine
English name: Benzenediamine, ar, ar-diethyl-ar-methyl-English aliases:Diethyltoluenediamine; ar, ar-Diethyl-ar-methylbenzenediamine;Diethylmethylbenzenediamine;
CAS No. :68479-98-1
EINECS No. :270 -877-4
Molecular formula: C11H18N2
Molecular Weight: 178.28
Boiling point: 310 ℃
Refractive index: 1.581
Flash Point: > 140 ℃
Inchi: InChI = 1/C11H18N2/c1-4-8-6-7 (3) 10 (12) 11 (13) 9 (8) 5-2/h6H ,4-5,12-13H2 ,1-3H3 density : 1.022
Risk Codes: R10; R35
RIDADR: UN 3082
Safety instructions: S2; S26; S39; S61
Packing Group: III
Hazard Class: 6.1
Floor construction should have the condition
1), a new pouring concrete surface shall be maintained for a period of time fully dry rear can construction,
2), because of liquid curing agent on the surface isn't film, its flatness, bright and clean degree to a great extent, dependent on the ground. So the new pouring concrete surface protection is very important,
3), when you receive light to avoid mark, slag cement and shoes printing, color, etc. To avoid the paint, oil, smashing, scratches and other surface, damage,
4), construction temperature: not less than zero, no more than 50 degrees
Hardening floor construction basic requirements
1), remove the floating cement and sundry: use the installation disk mechanical float (edge of the template appropriate USES wood trowel) evenly to remove concrete surface laitance layer
2), the smoothness. Flatness is whether the basic of basic level surface is in horizontal position, whether there is irregular uneven. Flatness simple judgment method is post rod of length 2 meters on the ground at the grass-roots level, of gap on the basis of not more than 2 mm.
3), the base surface smoothness. Smoothness is whether in the construction of cement mortar surface with a metal float daub is very smooth, not rough, rough. If the base surface state particularly coarse, a waste of labor and materials. Smoothness is generally judged by visual inspection.
Base treatment purposes
1), remove dust, loose old paint film on the surface of the concrete, oil, etc., can make the material more effectively penetrate into concrete inside;
2), the structure of cutting seam, seams, cracks, empty drum part do the corresponding processing, to ensure the overall unity of ground effect.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian