News Details
Epoxy plasticiz
2017-12-11 11:38:04
Epoxy plasticizer include epoxidized soybean oil (ESO), octyl epoxy stearate (EOST), epoxy four hydrogen ortho two carboxylate, epoxy stearate, and glycidyl ether. Epoxy plasticizers have good stability for light and heat, and have the advantages of high temperature resistance, low temperature resistance, non migration and no frost spray.
The combination of epoxy plasticizer and phthalic acid ester plasticizer can produce a good synergistic effect. Among them, epoxidized soybean oil is an epoxy plasticizer developed at home and abroad. It is widely used in plastics industry, coating industry, new polymer materials and rubber industry.
O. Fenollar research used epoxy linseed oil (ELO) instead of phthalate two ester to plasticate PVC. Because of its good plasticizing effect and its harmless, degradable properties, it has attracted much attention.
Epoxidized soybean oil is a chemical product made from soybean oil after oxidation treatment. It is a light yellow viscous oil liquid at room temperature. It is a widely used polyvinyl chloride nontoxic plasticizer and stabilizer. It has good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxidized soybean oil is light yellow viscous oily liquid at room temperature. Its solubility in water is <0.01 (25 degrees C), the solubility of water in this product is 0.55% (25 C), and it is soluble in hydrocarbons, ketones, esters, higher alcohols and other organic solvents, and it is slightly soluble in ethanol. The product is one of the most widely used polyvinyl chloride nontoxic plasticizers and stabilizers: good compatibility with PVC resin, low volatility and small mobility.
It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials. This product can be used for all polyvinyl chloride products. Such as all kinds of food packaging materials, medical products, film, sheet, pipe, refrigerator seal, artificial leather, floor leather, plastic wallpaper, cable and other daily-use plastic products, can also be used for special printing ink, paint, paint, synthetic rubber and liquid composite stabilizing agent.
The higher the ESO epoxy value, the better the heat resistance, the lower the iodine value of ESO and the compatibility of PVC, the better it is, the less easy it is to precipitate.
The following is a market price higher than 6.60 products: epoxy value, iodine value is less than or equal to 3
Introduction of epoxy soybean oil CP Cizer B-22 and deodorizing epoxy soybean oil CP Cizer B-22D
The hydrogen peroxide produced by the epoxy soybean oil, stable quality, and has passed ISO 9002 quality certification for PVC products as a non-toxic stabilizer and plasticizer.
Deodorization grade epoxy soybean oil development department B-22D low odor epoxy soybean oil, available in low odor demand of PVC products, as a non-toxic stabilizer and plasticizer, mainly in the aspects of market positioning PVC film.
Two octyl terephthalate (plasticizer DOTP) raw materials are generally synthesized from the process route of terephthalic acid or two methyl terephthalate as raw material.
Safety data for export goods of two octyl terephthalate (plasticizer DOTP)
CAS No.:6422-86-2
State of the goods: export by general goods.
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
The addition of B-22 and B-22D in coatings, inks, CCL, pesticide fields, such as coating, synthetic resin products such as UV.
The epoxy soybean oil is called ESO, and its composition is linoleic acid (51% ~ 57%), oleic acid (32% - 36%), palmitic acid (2.4%~2.8%), stearic acid (4.4% - 4.6%), etc. A light yellow oily liquid with a relative density of 0.989. The epoxy value is 6.6%. The freezing point is 8 degrees centigrade. The boiling point is 150 C (0.53kPa): the refractive index is 1.4716. Viscosity (25 C) 325mP.a? S. The flash point (open loop) is 280 degrees C. It dissolves in alkanes and most organic solvents, and is slightly soluble in water. It is compatible with PVC, chlorinated rubber and NBR. Low volatility, low mobility, heat resistance, light resistance and weatherability. Non-toxic。 Biodegradable.
It is used as a plasticizer for epoxy resin, PVC, chloroprene rubber, NBR and so on. However, the solubility of pure epoxidized soybean oil and epoxy resin is generally not good. It can form oligomers through ring opening polymerization of epoxidized soybean oil, or reaction with maleic anhydride, or double bond crosslinking initiated by two cumene, and the compatibility with epoxy resin is obviously improved.
B-22 and B-22D with molecular weight of about 1000 as PVC DOP plasticizers, volatile 1/5, solvent resistance is much better than that of DOP. B-22 and B-22D of the iodine price, so the resistance of transitional resistance.
B-22 has synergistic effect (Synergitism) in PVC products and metal stabilizers, so that the weatherability, heat resistance and transparency of PVC resin are greatly improved. Meanwhile, the amount of metal stabilizer can be reduced, and the cost will be reduced.
Today, B-22 and Ca-Zn stabilizer are not harmful and harmless, and can replace Cd-Ba-Zn or lead - based stabilizers. With the addition of B-22 in the refractory formula, the stability is greatly improved.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
The combination of epoxy plasticizer and phthalic acid ester plasticizer can produce a good synergistic effect. Among them, epoxidized soybean oil is an epoxy plasticizer developed at home and abroad. It is widely used in plastics industry, coating industry, new polymer materials and rubber industry.
O. Fenollar research used epoxy linseed oil (ELO) instead of phthalate two ester to plasticate PVC. Because of its good plasticizing effect and its harmless, degradable properties, it has attracted much attention.
Epoxidized soybean oil is a chemical product made from soybean oil after oxidation treatment. It is a light yellow viscous oil liquid at room temperature. It is a widely used polyvinyl chloride nontoxic plasticizer and stabilizer. It has good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxidized soybean oil is light yellow viscous oily liquid at room temperature. Its solubility in water is <0.01 (25 degrees C), the solubility of water in this product is 0.55% (25 C), and it is soluble in hydrocarbons, ketones, esters, higher alcohols and other organic solvents, and it is slightly soluble in ethanol. The product is one of the most widely used polyvinyl chloride nontoxic plasticizers and stabilizers: good compatibility with PVC resin, low volatility and small mobility.
It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials. This product can be used for all polyvinyl chloride products. Such as all kinds of food packaging materials, medical products, film, sheet, pipe, refrigerator seal, artificial leather, floor leather, plastic wallpaper, cable and other daily-use plastic products, can also be used for special printing ink, paint, paint, synthetic rubber and liquid composite stabilizing agent.
The higher the ESO epoxy value, the better the heat resistance, the lower the iodine value of ESO and the compatibility of PVC, the better it is, the less easy it is to precipitate.
The following is a market price higher than 6.60 products: epoxy value, iodine value is less than or equal to 3
Introduction of epoxy soybean oil CP Cizer B-22 and deodorizing epoxy soybean oil CP Cizer B-22D
The hydrogen peroxide produced by the epoxy soybean oil, stable quality, and has passed ISO 9002 quality certification for PVC products as a non-toxic stabilizer and plasticizer.
Deodorization grade epoxy soybean oil development department B-22D low odor epoxy soybean oil, available in low odor demand of PVC products, as a non-toxic stabilizer and plasticizer, mainly in the aspects of market positioning PVC film.
Two octyl terephthalate (plasticizer DOTP) raw materials are generally synthesized from the process route of terephthalic acid or two methyl terephthalate as raw material.
Safety data for export goods of two octyl terephthalate (plasticizer DOTP)
CAS No.:6422-86-2
State of the goods: export by general goods.
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
The addition of B-22 and B-22D in coatings, inks, CCL, pesticide fields, such as coating, synthetic resin products such as UV.
The epoxy soybean oil is called ESO, and its composition is linoleic acid (51% ~ 57%), oleic acid (32% - 36%), palmitic acid (2.4%~2.8%), stearic acid (4.4% - 4.6%), etc. A light yellow oily liquid with a relative density of 0.989. The epoxy value is 6.6%. The freezing point is 8 degrees centigrade. The boiling point is 150 C (0.53kPa): the refractive index is 1.4716. Viscosity (25 C) 325mP.a? S. The flash point (open loop) is 280 degrees C. It dissolves in alkanes and most organic solvents, and is slightly soluble in water. It is compatible with PVC, chlorinated rubber and NBR. Low volatility, low mobility, heat resistance, light resistance and weatherability. Non-toxic。 Biodegradable.
It is used as a plasticizer for epoxy resin, PVC, chloroprene rubber, NBR and so on. However, the solubility of pure epoxidized soybean oil and epoxy resin is generally not good. It can form oligomers through ring opening polymerization of epoxidized soybean oil, or reaction with maleic anhydride, or double bond crosslinking initiated by two cumene, and the compatibility with epoxy resin is obviously improved.
B-22 and B-22D with molecular weight of about 1000 as PVC DOP plasticizers, volatile 1/5, solvent resistance is much better than that of DOP. B-22 and B-22D of the iodine price, so the resistance of transitional resistance.
B-22 has synergistic effect (Synergitism) in PVC products and metal stabilizers, so that the weatherability, heat resistance and transparency of PVC resin are greatly improved. Meanwhile, the amount of metal stabilizer can be reduced, and the cost will be reduced.
Today, B-22 and Ca-Zn stabilizer are not harmful and harmless, and can replace Cd-Ba-Zn or lead - based stabilizers. With the addition of B-22 in the refractory formula, the stability is greatly improved.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian