News Details
Epoxy ester plasticizer
2017-12-18 12:10:46
Epoxy ester plasticizer is widely used in recent years. Epoxy ester plasticizer not only absorbs hydrogen chloride released from PVC resin when decomposing, but also dissolves with PVC resin, so epoxy ester plasticizer is both plasticizer and stabilizer.
The epoxy ester plasticizer is mainly used as a secondary plasticizing penalty for polyvinyl chloride products with high weatherability. Its varieties include epoxy soybean oil, epoxy fatty acid octyl ester and so on.
(1) epoxy soybean oil. Soybean oil fatty acids with a mixture of glycerin, epoxy - oil is a yellow oily liquid, non-toxic, soluble in most organic solvents and hydrocarbons. Epoxy soybean oil and polyester plasticizer are used to prevent the latter from migrating outward.
(2) butyl epoxy fatty acid butyl ester. The fatty acid composition of a epoxy fatty acid ester epoxy butyl stearate, epoxyfuroic oleic butyl acrylate, butyl acrylate, epoxy soybean oleic acid epoxy cottonseed oleic butyl butyl acrylate, epoxy. Epoxy rapeseedate tallate butyl acrylate, epoxy, epoxy cocklebur oleic butyl butyl oleate and other varieties of pigs.
(3) epoxy fatty acid octyl (ED3). Different kinds of fatty acids, such as epoxy stearate octyl, epoxy soybean oleic acid octyl, epoxy Tyl oleate octyl, etc.
(4) epoxy four hydrogen o-phthalic acid two formic acid two octyl (EPS). A colorless to pale yellow oily liquid.
Epoxidized soybean oil is a chemical product made from soybean oil after oxidation treatment. It is a light yellow viscous oil liquid at room temperature. It is a widely used polyvinyl chloride nontoxic plasticizer and stabilizer. It has good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxidized soybean oil is light yellow viscous oily liquid at room temperature. Its solubility in water is <0.01 (25 degrees C), the solubility of water in this product is 0.55% (25 C), and it is soluble in hydrocarbons, ketones, esters, higher alcohols and other organic solvents, and it is slightly soluble in ethanol. The product is one of the most widely used polyvinyl chloride nontoxic plasticizers and stabilizers: good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxy soybean oil can be used for all polyvinyl chloride products. Such as all kinds of food packaging materials, medical products, film, sheet, pipe, refrigerator seal, artificial leather, floor leather, plastic wallpaper, cable and other daily-use plastic products, can also be used for special printing ink, paint, paint, synthetic rubber and liquid composite stabilizing agent. The higher the ESO epoxy value, the better the heat resistance, the lower the iodine value of ESO and the compatibility of PVC, the better it is, the less easy it is to precipitate.
Two octyl terephthalate (plasticizer DOTP) raw materials are generally synthesized from the process route of terephthalic acid or two methyl terephthalate as raw material.
Safety data for export goods of two octyl terephthalate (plasticizer DOTP)
CAS No.:6422-86-2
State of the goods: export by general goods.
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
The epoxy soybean oil is called ESO, and its composition is linoleic acid (51% ~ 57%), oleic acid (32% - 36%), palmitic acid (2.4%~2.8%), stearic acid (4.4% - 4.6%), etc. A light yellow oily liquid with a relative density of 0.989. The epoxy value is 6.6%. The freezing point is 8 degrees centigrade. The boiling point is 150 C (0.53kPa): the refractive index is 1.4716. Viscosity (25 C) 325mP.a? S. The flash point (open loop) is 280 degrees C. It dissolves in alkanes and most organic solvents, and is slightly soluble in water. It is compatible with PVC, chlorinated rubber and NBR. Low volatility, low mobility, heat resistance, light resistance and weatherability. Non-toxic。 Biodegradable.
Epoxy soybean oil is used as a plasticizer for epoxy resin, PVC, chloroprene rubber, NBR and so on. However, the solubility of pure epoxidized soybean oil and epoxy resin is generally not good. It can form oligomers through ring opening polymerization of epoxidized soybean oil, or reaction with maleic anhydride, or double bond crosslinking initiated by two cumene, and the compatibility with epoxy resin is obviously improved.
Epoxide butyl stearate was esterified by oleic acid and butanol, and then produced by epoxidation of hydrogen oxide. It has good compatibility with PVC, high plasticization rate, cold resistance, heat resistance, good oil resistance and low volatility. It can be used as a cold resistant and heat-resistant plasticizer for polyvinyl chloride. It is suitable for low temperature agricultural film, artificial leather, hose and other products.
Epoxy stearate octyl ester is prepared by esterification of oleic acid and 2- ethyl hexyl alcohol by epoxidation. Small volatility, good resistance to pumping and electrical insulation, cold resistance is especially good, and has good heat resistance and transparency. For plasticized paste, the initial viscosity of the paste can be reduced.
Epoxy octyl stearate with low toxicity, toxicity of itokazu T=1000 according to the general provisions of storage and transportation of flammable chemicals. It can be used as plasticizer and stabilizer for polyvinyl chloride. It is suitable for films and artificial leather products.
4,5- epoxide four hydrogen o-phthalic acid two formic acid two isooctyl density 1.007g/cm3 (20 C). The index of refraction is 1.4656. Viscosity (25 C) 118mPa? S. The flash point is 217 degrees centigrade. The melting point is <-30 C. It can be mixed with organic solvents such as alcohol and benzene. Insoluble in water.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
The epoxy ester plasticizer is mainly used as a secondary plasticizing penalty for polyvinyl chloride products with high weatherability. Its varieties include epoxy soybean oil, epoxy fatty acid octyl ester and so on.
(1) epoxy soybean oil. Soybean oil fatty acids with a mixture of glycerin, epoxy - oil is a yellow oily liquid, non-toxic, soluble in most organic solvents and hydrocarbons. Epoxy soybean oil and polyester plasticizer are used to prevent the latter from migrating outward.
(2) butyl epoxy fatty acid butyl ester. The fatty acid composition of a epoxy fatty acid ester epoxy butyl stearate, epoxyfuroic oleic butyl acrylate, butyl acrylate, epoxy soybean oleic acid epoxy cottonseed oleic butyl butyl acrylate, epoxy. Epoxy rapeseedate tallate butyl acrylate, epoxy, epoxy cocklebur oleic butyl butyl oleate and other varieties of pigs.
(3) epoxy fatty acid octyl (ED3). Different kinds of fatty acids, such as epoxy stearate octyl, epoxy soybean oleic acid octyl, epoxy Tyl oleate octyl, etc.
(4) epoxy four hydrogen o-phthalic acid two formic acid two octyl (EPS). A colorless to pale yellow oily liquid.
Epoxidized soybean oil is a chemical product made from soybean oil after oxidation treatment. It is a light yellow viscous oil liquid at room temperature. It is a widely used polyvinyl chloride nontoxic plasticizer and stabilizer. It has good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxidized soybean oil is light yellow viscous oily liquid at room temperature. Its solubility in water is <0.01 (25 degrees C), the solubility of water in this product is 0.55% (25 C), and it is soluble in hydrocarbons, ketones, esters, higher alcohols and other organic solvents, and it is slightly soluble in ethanol. The product is one of the most widely used polyvinyl chloride nontoxic plasticizers and stabilizers: good compatibility with PVC resin, low volatility and small mobility. It has excellent thermal stability and light stability, water resistance and oil resistance. It can give products good mechanical strength, weatherability and electrical properties, and no toxicity. It is internationally recognized chemical process aids for food packaging materials.
Epoxy soybean oil can be used for all polyvinyl chloride products. Such as all kinds of food packaging materials, medical products, film, sheet, pipe, refrigerator seal, artificial leather, floor leather, plastic wallpaper, cable and other daily-use plastic products, can also be used for special printing ink, paint, paint, synthetic rubber and liquid composite stabilizing agent. The higher the ESO epoxy value, the better the heat resistance, the lower the iodine value of ESO and the compatibility of PVC, the better it is, the less easy it is to precipitate.
Two octyl terephthalate (plasticizer DOTP) raw materials are generally synthesized from the process route of terephthalic acid or two methyl terephthalate as raw material.
Safety data for export goods of two octyl terephthalate (plasticizer DOTP)
CAS No.:6422-86-2
State of the goods: export by general goods.
Use of two octyl terephthalate (plasticizer DOTP)
1.DOTP has good electrical and thermal properties. It can be used to replace DOP in the sheath of PVC plastic wire and can also be used in the production of artificial leather membrane. In addition, with excellent compatibility, terephthalic acid ester is two PVC acrylonitrile derivatives plastic plasticizer, plasticizer, plasticizer, polyvinyl butyral nitrile rubber plasticizer, plasticizer for cellulose nitrate. The improvement of the product and plays the role of hardness and deformation, can be used as softener in NBR, chloroprene rubber, EPDM rubber and other products three. Especially for cable material, it has good plasticizing effect and low volatility. It is widely used in various products that require heat resistance and high insulation. It is an ideal plasticizer for producing 70 PVC cable material and other volatile resistant products.
2.DOTP is used for the PVC products in the car, which can solve the fog problem of the glass window. DOTP is also used for high quality lubricants or lubricant additives furniture and interior decoration paint, and precision instruments, nitro varnish additives, paper softener, biaxially oriented polyester amide membrane film, plastic bags and other crafts, plasma storage.
3. because the linear molecular structure of DOTP is similar to DOS and DOA, its cold resistance is also better.
The volume resistivity of 4.DOTP is 10-20 times higher than that of DOP, and its mobility is excellent.
5., because DOTP does not contain o-phthalate two formate, it is not an environmental friendly plasticizer in the range of 16 16 kinds of plasticizers containing o-phthalic acid in the European Union and other countries.
The epoxy soybean oil is called ESO, and its composition is linoleic acid (51% ~ 57%), oleic acid (32% - 36%), palmitic acid (2.4%~2.8%), stearic acid (4.4% - 4.6%), etc. A light yellow oily liquid with a relative density of 0.989. The epoxy value is 6.6%. The freezing point is 8 degrees centigrade. The boiling point is 150 C (0.53kPa): the refractive index is 1.4716. Viscosity (25 C) 325mP.a? S. The flash point (open loop) is 280 degrees C. It dissolves in alkanes and most organic solvents, and is slightly soluble in water. It is compatible with PVC, chlorinated rubber and NBR. Low volatility, low mobility, heat resistance, light resistance and weatherability. Non-toxic。 Biodegradable.
Epoxy soybean oil is used as a plasticizer for epoxy resin, PVC, chloroprene rubber, NBR and so on. However, the solubility of pure epoxidized soybean oil and epoxy resin is generally not good. It can form oligomers through ring opening polymerization of epoxidized soybean oil, or reaction with maleic anhydride, or double bond crosslinking initiated by two cumene, and the compatibility with epoxy resin is obviously improved.
Epoxide butyl stearate was esterified by oleic acid and butanol, and then produced by epoxidation of hydrogen oxide. It has good compatibility with PVC, high plasticization rate, cold resistance, heat resistance, good oil resistance and low volatility. It can be used as a cold resistant and heat-resistant plasticizer for polyvinyl chloride. It is suitable for low temperature agricultural film, artificial leather, hose and other products.
Epoxy stearate octyl ester is prepared by esterification of oleic acid and 2- ethyl hexyl alcohol by epoxidation. Small volatility, good resistance to pumping and electrical insulation, cold resistance is especially good, and has good heat resistance and transparency. For plasticized paste, the initial viscosity of the paste can be reduced.
Epoxy octyl stearate with low toxicity, toxicity of itokazu T=1000 according to the general provisions of storage and transportation of flammable chemicals. It can be used as plasticizer and stabilizer for polyvinyl chloride. It is suitable for films and artificial leather products.
4,5- epoxide four hydrogen o-phthalic acid two formic acid two isooctyl density 1.007g/cm3 (20 C). The index of refraction is 1.4656. Viscosity (25 C) 118mPa? S. The flash point is 217 degrees centigrade. The melting point is <-30 C. It can be mixed with organic solvents such as alcohol and benzene. Insoluble in water.
Copyright: Zhang Jia Gang YaRui Chemical co.,Ltd
http://www.yaruichem.com
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian